Lockout/Tagout (LOTO) Forms

This is a free, fillable lockout/tagout (LOTO) forms packet. Use it to write an equipment-specific energy control procedure, log each lockout, and record the yearly review of each procedure.

Download the lockout/tagout forms (PDF)

The forms are a general-industry reference for servicing and maintenance. They do not authorize work, replace training, or take the place of your written energy control program. Complete and validate every blank with trained authorized employees before use, and stop work if an energy source, isolation point or verification method is uncertain.

What's inside the forms

WK-EHS-14 is a 7-page standalone document with:

  • Part 1A. An equipment and energy isolation map for every source and isolation point.
  • Part 1B. Equipment-specific shutdown, lock/tag placement, stored-energy control and verification steps.
  • Part 1C. Return-to-service steps, plus space for group work, shift changes, contractors and temporary testing.
  • Part 2. A reusable lockout/tagout log for each person and personal device.
  • Part 3. An annual periodic inspection record, including a review of user responsibilities.

How to use them

  1. Use one equipment-specific procedure for each machine. A common procedure may cover genuinely identical energy sources only after a site review confirms this.
  2. Use the log for each lockout event and each personal lock or tag. A log is not a substitute for physical isolation or the written procedure.
  3. Use the periodic inspection record at least annually. The inspector should be an authorized employee other than the people using the procedure being inspected.
  4. Keep completed procedures, logs and inspection records with your written energy control program.

The forms reference OSHA 29 CFR 1910.147 as a public source. That listing does not mean the templates meet any requirement in it. Construction, electrical work and certain industries have separate or additional rules. Check the current requirements that apply to your site.

Related forms and supplies

WellKept Supply is a distributor, and lead times vary by product.

FAQ

What is included in the lockout/tagout forms?

WK-EHS-14 is a 7-page standalone packet. It has an equipment-specific energy control procedure (an isolation map, shutdown and verification steps, and return-to-service arrangements), a reusable lockout/tagout log, and an annual periodic inspection record.

Do these forms authorize work or replace our energy control program?

No. They are blank reference templates. They do not authorize work, replace employee training, or take the place of your written energy control program or qualified electrical work practices. A knowledgeable safety professional and trained authorized employees should adapt and verify each procedure on the actual equipment before use.

Which rule do these forms reference?

The forms reference OSHA 29 CFR 1910.147, which addresses hazardous energy during general-industry servicing and maintenance. Construction, electrical shock work and certain industries have separate or additional rules. Listing that source does not mean the forms meet any requirement in it. Check the current rules that apply to your site.

How often should we inspect a LOTO procedure?

The periodic inspection record is meant to be used at least annually, with an authorized inspector who is not one of the people using the procedure being inspected. Your site program may call for a different or more frequent review. Retrain when procedures, equipment or knowledge change.

Can we use a tag instead of a lock?

The worksheets are written for lockout wherever the isolating device can accept a lock. Tags warn but do not restrain equipment. A tagout-only program needs separately developed procedures and training. These worksheets do not establish that program.

Back to all free EHS forms

Provided by WellKept Supply as a general reference template. Adapt to your site and local, state and federal requirements. These forms do not guarantee regulatory compliance.