Free Safety Signage and Label Pack

This is a free safety signage and label pack you can print on a standard office printer. It includes spill kit location signs, eyewash and shower signs, waste and storage area signs, fill-in drum labels and a floor-marking color guide.

Download the safety signage and label pack (PDF)

Each sign is a full 8.5 × 11 inch page made from plain shapes and text so it prints clearly. Use the ones you need and post them where people will look for them. These are general location and information signs. They do not replace the specific hazard signs, labels or tags a rule, your chemical supplier or your site plan calls for.

What's inside the pack

WK-SGN-01 is a 17-page standalone pack with:

  • Spill Kit Location signs with arrows right, left, ahead and down, plus a Spill Kit Inside sign for cabinets, doors and lockers.
  • Eyewash Station and Emergency Shower signs.
  • Hazardous Waste Accumulation Area, Used Oil, Used Absorbents for Disposal, No Smoking, Authorized Personnel Only and Secondary Containment Area signs.
  • A sheet of fill-in drum contents labels (four per page).
  • A floor-marking color guide based on common industry practice, not a required color code.

How to use the pack

  1. Print on 8.5 × 11 inch paper or card stock at 100% scale (no “fit to page”). For longer life, laminate the page or use durable or adhesive label stock.
  2. Post signs at eye level where they can be seen on approach, and point arrow signs toward the actual equipment.
  3. Type into the fill-in fields before printing, or write on the printed sign with a permanent marker.
  4. Check the wording and labeling rules that apply where you operate. Keep supplier labels in place; the drum labels add information and do not replace them.

Related supplies and forms

WellKept Supply is a distributor, and lead times vary by product.

FAQ

What signs are in the pack?

WK-SGN-01 is a 17-page pack. It includes spill kit location signs with arrows (right, left, ahead and down), a Spill Kit Inside sign for cabinets, an eyewash station sign, an emergency shower sign, hazardous waste accumulation area, used oil, used absorbents for disposal, no smoking, authorized personnel only, a secondary containment area sign, a sheet of fill-in drum labels, and a floor-marking color guide.

How should I print the signs?

Print on 8.5 by 11 inch paper or card stock at 100% scale, with no "fit to page." For longer life, laminate the page or use durable or adhesive label stock. Post signs at eye level where they can be seen on approach, and point arrow signs toward the actual equipment.

Do these signs replace required hazard labels or tags?

No. These are general location and information signs. They do not replace the specific hazard signs, labels or tags a rule, your chemical supplier or your site plan calls for, such as container labels under hazard communication, hazardous waste labels, or lockout tags. Some programs also set specific wording, for example marking used oil containers with the words "Used Oil."

Is the floor-marking color guide required?

No. The guide reflects common industry practice, not a single required color code. Pick a scheme, write it down, train people on it and use it the same way across your site. The guide is a starting point for aisles, keep-clear areas and related markings.

Can I type on the signs before I print them?

Yes. Several signs have fill-in fields, including Spill Kit Inside, the hazardous waste area sign, used absorbents and the drum labels. Type into those fields before you print, or write on the printed sign with a permanent marker.

Back to all free EHS forms

Provided by WellKept Supply as a general reference template. Adapt to your site and local, state and federal requirements. These forms do not guarantee regulatory compliance.